Description
The A104 is also used to extend the life of data WAN networks for businesses with multiple locations. They are highly compatible with the vast majority of commercial-grade servers, allowing you to keep your existing hardware routing equipment on-site. Create custom routing equipment using advanced drivers and API to replace an existing obsolete setup. Sangoma’s A104 four (4) port T1 / E1 SD-WAN fail-over and data card support full-duplex data transfer rates of up to 8,192 Mbps. The A104 is powered by a robust driver and API suite that supports WAN protocols like HDLC, Frame Relay, X.25, ATM, PPP, HDLC, and MULTI-LINK.
Features
- Hardware that is intelligent: Downloadable Field Programming with programmable gate arrays in a variety of operating modes.
- Single-channel HDLC per line, T1/E1, and fractional T1/E1.
- Optionally available as A101-C or A102-C with Channelized T1/E1 on either or both ports and up to 64 DS0s carrying either voice or HDLC data.
- Power: 520mA at 5 volts.
- MTBF: calculated to be greater than one million hours.
- PCI 32-bit 5v and 64-bit 3.3v are both supported.
- Temperature range: 0 to 45 degrees Celsius.
- All setup and configuration are done in software or via the machine’s BIOS.
- DSU/CSU configuration is entirely software-based.
- HDB3, AMI, and B8ZS line decoding.
- CRC4, non-CRC4, ESF, D4T1/E1 framing.
- Normal and Master clocking modes are available.
Do you want to talk to one of our Telephony experts about your project?
Please feel free to fill out our Inquiry Form if you have any telephony solutions that you’d want to discuss. Within the following 12 working hours, one of our business experts will contact you.